top of page

Canon R8 Setup with Glambot® and Snappic

  1. Set camera mode to [Video] and [A+]


  1. Set Lens AF to [On] and Lens Stabilizer to [On]


  1. Movie Recording Tab 1, Set High Frame Rate to [On] and Movie rec. Size to [FHD 179.8fps Standard (IPB)]


  1. Movie Recording Tab 3, select [IS Mode] and set Digital IS to [Enhanced]


  1. AF Tab 1, set Movie Servo AF to [Enable]


  1. Network Tab 2, set Wi-Fi settings to [Disable] and Bluetooth settings to [Disable]


  1. Settings Tab 1, set Auto Rotate to [On] and Add Movie Rotate Info to [Enable]


  1. Settings Tab 3, set power saving auto power off to [Disable]


  1. Settings Tab 4, set Choose USB connection app to [Photo Import/Remote Control]


  1. Attach the camera to the Glambot® using the Universal DSLR Mount


  1. If using a power adapter, plug the USB-C into the Power Port on the Glambot® 


  1. Connect the Coiled USB-C to USB-C cable into the camera data port and the Glambot® data port


  1. Connect the iPhone/iPad into the Glambot data port and turn the camera on


  1. Open Snappic and Select your event


  1. Tap [Select Accessories] and choose [Volume Buttons] 


  1. Tap [Configure Camera] and select [EOS R8]  *note: it doesn’t matter which EOS R8 selection you choose, they will all work the same. 


  1. Tap [Start Photo Booth] and tap the Live Preview Rotation left arrow once if filming portrait, then tap [Start Booth]


  1. You’re Glambot® is now ready to begin filming!

bottom of page